ASSESSMENT OF SPECIMEN REJECTION PATTERNS AND THEIR IMPACT ON CLINICAL LABORATORY EFFICIENCY

Authors

  • krishna nagar mpmsu Author

Keywords:

specimen rejection, pre-analytical error, laboratory quality, turnaround time, hemolysis

Abstract

Background: Pre-analytical errors are a major source of laboratory inefficiency because unsuitable specimens require recollection, additional processing and communication with clinical units. This study assessed specimen rejection patterns and their effect on laboratory workflow.

Methods: A prospective observational framework was applied to specimens received between January and June 2026. Each specimen was classified by acceptance status, specimen type, clinical source, laboratory section, primary rejection reason, recollection requirement, additional turnaround-time (TAT) delay and preventability. Frequencies, percentages and Wilson 95% confidence intervals (CI) were calculated. The dataset analyzed here (10,000 specimens) is illustrative and does not represent verified clinical observations.

Results: Of 10,000 specimens, 500 were rejected (5.0%; 95% CI 4.6–5.4). Hemolysis (29.0%), clotted specimens (21.0%) and insufficient quantity (16.0%) together accounted for 66.0% of rejections. Clinical Biochemistry (38.0%) and Hematology (29.0%) contributed the most rejected specimens, and inpatient wards (33.0%) were the leading clinical source. Repeat collection was required for 425 rejected specimens (85.0%), an additional delay of more than 60 minutes occurred in 42.0%, and 78.0% of rejections were classified as potentially preventable.

Conclusion: Specimen rejection creates a substantial workflow burden through recollection and TAT delay, and most rejections arise from a few preventable causes. Routine monitoring of rejection indicators, standardized collection and transport procedures, and targeted staff training are appropriate priorities. The values reported here must be replaced with verified laboratory data before submission or publication.

Downloads

Download data is not yet available.

References

1. Bonini P, Plebani M, Ceriotti F, Rubboli F. Errors in laboratory medicine. Clin Chem. 2002;48(5):691-698.

2. Plebani M. Errors in clinical laboratories or errors in laboratory medicine? Clin Chem Lab Med. 2006;44(6):750-759. doi:10.1515/CCLM.2006.123.

3. Lippi G, Becan-McBride K, Behulova D, et al. Preanalytical quality improvement: in quality we trust. Clin Chem Lab Med. 2013;51(1):229-241. doi:10.1515/cclm-2012-0597.

4. World Health Organization. Laboratory quality management system: handbook. Geneva: World Health Organization; 2011.

5. World Health Organization. Laboratory Quality Stepwise Implementation tool: develop sample acceptance/rejection criteria [Internet]. Geneva: World Health Organization; [cited 2026 Sep 19]. Available from: https://extranet.who.int/lqsi/content/develop-sample-acceptationrejection-criteria

6. Plebani M. Quality indicators to detect pre-analytical errors in laboratory testing. Clin Biochem Rev. 2012;33(3):85-88.

7. Plebani M, Sciacovelli L, Aita A, Chiozza ML. Harmonization of pre-analytical quality indicators. Biochem Med (Zagreb). 2014;24(1):105-113. doi:10.11613/BM.2014.012.

8. Plebani M, Sciacovelli L, Aita A, Pelloso M, Chiozza ML. Performance criteria and quality indicators for the pre-analytical phase. Clin Chem Lab Med. 2015;53(6):943-948. doi:10.1515/cclm-2014-1124.

9. Getawa S, Aynalem M, Melku M, Adane T. Blood specimen rejection rate in clinical laboratory: a systematic review and meta-analysis. Pract Lab Med. 2023;33:e00303. doi:10.1016/j.plabm.2022.e00303.

10. Chang J, Kim S, Yoo SJ, Park EJ, Um TH, Cho CR. Preanalytical errors in the central laboratory of a university hospital based on the analysis of year-round data. Clin Lab. 2020;66(9). doi:10.7754/Clin.Lab.2020.200110.

11. Tasneem A, Zubair M, Rasool Z, Tareen FZ. Frequency and types of pre-analytical errors in a clinical laboratory of a specialized healthcare hospital. Pak J Med Sci. 2024;40(2 ICON Suppl):S70-S74. doi:10.12669/pjms.40.2(ICON).8963.

12. Wilson EB. Probable inference, the law of succession, and statistical inference. J Am Stat Assoc. 1927;22(158):209-212.

13. Jandial S, Gosai V. Sample rejection rate in clinical biochemistry laboratory of a tertiary care centre. Int J Res Med. 2017;5(4):127-131.

14. Jafari E, Malekpour Afshar R, Aminzade R. Rates and reasons of laboratory sample rejection due to pre-analytical errors in clinical settings. Arch Iran Med. 2022;25(3):166-170. doi:10.34172/aim.2022.28.

15. Noor T, Imran A, Raza H, Umer S, Malik NA, Chughtai AS. An overview of complete blood count sample rejection rates in a clinical hematology laboratory due to various preanalytical errors. Cureus. 2023;15(1):e34444. doi:10.7759/cureus.34444.

16. Lippi G, Blanckaert N, Bonini P, Green S, Kitchen S, Palicka V, et al. Haemolysis: an overview of the leading cause of unsuitable specimens in clinical laboratories. Clin Chem Lab Med. 2008;46:764-772.

17. Simundic AM, Baird G, Cadamuro J, Costelloe SJ, Lippi G. Managing hemolyzed samples in clinical laboratories. Crit Rev Clin Lab Sci. 2020;57(1):1-21. doi:10.1080/10408363.2019.1664391.

18. Kitchen S, Adcock DM, Dauer R, Kristoffersen AH, Lippi G, Mackie I, et al. International Council for Standardization in Haematology (ICSH) recommendations for processing of blood samples for coagulation testing. Int J Lab Hematol. 2021;43(6):1272-1283. doi:10.1111/ijlh.13702.

19. Kristoffersen AH, Hollestelle MJ, Cadamuro J, Hillarp A, Jennings I, Marrington R, et al. Practical handling of hemolytic, icteric and lipemic samples for coagulation testing in European laboratories: a collaborative survey from the European Organisation for External Quality Assurance Providers in Laboratory Medicine (EQALM). Clin Chem Lab Med. 2025;63(10):2074-2084. doi:10.1515/cclm-2025-0319.

20. Atay A, Demir L, Cuhadar S, Saglam G, Unal H, Aksun S, et al. Clinical biochemistry laboratory rejection rates due to various types of preanalytical errors. Biochem Med (Zagreb). 2014;24(3):376-382. doi:10.11613/BM.2014.040.

21. Dhotre PS, Dhotre SV, Shaikh AKAR. A comparative study of pre-analytical errors in central clinical laboratory in a tertiary care hospital in Maharashtra. J Krishna Inst Med Sci Univ. 2020;9(2):67-72.

22. Cadamuro J, Lippi G, von Meyer A, Ibarz M, van Dongen-Lases E, Cornes M, et al. European survey on preanalytical sample handling - Part 2: practices of European laboratories on monitoring and processing haemolytic, icteric and lipemic samples. Biochem Med (Zagreb). 2019;29(2):020705. doi:10.11613/BM.2019.020705.

Downloads

Published

2026-09-19

How to Cite

ASSESSMENT OF SPECIMEN REJECTION PATTERNS AND THEIR IMPACT ON CLINICAL LABORATORY EFFICIENCY. (2026). ScholarBook International Journal of Research, Evidence and Innovation, 1(1), 19-30. https://journals.scholarbook.online/index.php/sijrei/article/view/3

Share

Similar Articles

You may also start an advanced similarity search for this article.